Release agent for easier cleaning of concrete polishing, cutting and troweling machines.

Release agent for easier cleaning of concrete polishing, cutting and troweling machines.

Product Technical Benefits:
  • Corrosion protection
  • Easy to use – spray, brush or wipe on.
  • Pleasant smelling
  • Water-based, zero VOC, low odour
  • Biodegradable
  • Lubricates, Penetrates, Protects, Cleans, and Displaces Moisture
Product Applications

This is a highly effective, easy to use product which is a non-toxic, biodegradable protective coating. It lubricates, is pleasant to use
and handle, contains no hydrocarbons and will keep your tools looking like new.

How To Use
  1. Read full Product Data Sheet before using M-ProtectTM
  2. Test on an inconspicuous area and allow to dry and then check the result.
  3. Ensure the surface to be protected is dry before applying.
  4. Apply when surface temperature is above 2°Celsius (36° F) and below 27°Celsius (80°F).
  5. This is a ready to use product. Do not dilute.
  6. Apply a thin even layer with a pump sprayer, brush or cloth.
  7. Apply to surface and then wipe off any excess with a cloth.
  8. M-ProtectTM is effective for protecting all of your equipment.

Causes skin irritation. Causes serious eye irritation.
Do not get in eyes, on skin or on clothing.
Wear protective gloves / protective clothing / eye protection / face protection.

First Aid

If on skin (or hair): Remove / Take off immediately all contaminated clothing. Rinse skin with water/shower.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

For advice, immediately contact a doctor, ambulance, or, a Poison Information Centre:
Australia – 13 11 26 (Australia Wide)
USA – American Association of Poison Control Centres 1-800-222-1222
Canadian Poison Centres – Ontario (24/7): Telephone: 416-813-5900; Toll free: 1-800-268- 9017

UK – England and Wales: NHS 111 – dial 111; Scotland: NHS 24 – dial 111; Republic of Ireland: 01 809 2166


Spillage – Take up mechanically or with absorbent material such as sand, earth or vermiculite.


UN Status: Not a regulated hazardous material for transportation.
Shelf Life and Storage Guidelines
Best within 2 years of manufacture date.
Store away from direct sunlight.
Keep container tightly sealed, in a well-ventilated place, at 36-90oF/2-32oC.

Country of Manufacture


Subscribe to our Newsletter

  • This field is for validation purposes and should be left unchanged.