CONCRETE DENSIFIERS

FORTI-TROWEL™

Special spherical nano-silica particles lubricate the surface of the wet slab.
Quicker helicopter trowelling with a smoother finish.
Reduces stickiness of low water content, plasticised, pozzolan enriched concrete to allow cleaner, easier roller screeding.
Forti-Trowel™ also creates complex silicate structures in the outer layer of concrete which results in smaller pores and slows evaporation of water.
May extend trowelling time in warm weather. Pouring concrete in hot weather (above 32 ⁰C )is not recommended
For optimal curing, of the slab apply Forti-Col EG™ to trowelled surface after the initial reaction of the cement has occurred (approx. 2-4 hours after pour).
Lower non-caustic pH is safer for people and surfaces.
Water-based, UV resistant and zero VOC.
Made at our factory in Melbourne, Australia.

Apply a generous, even coat of Forti-Trowel™ quickly over the freshly poured concrete with a pump sprayer and immediately begin trowelling.
If using a roller screed, spray an even layer before screeding to limit the concrete sticking to the roller and to provide a better result.
Helicopter trowel as usual. Spray more Forti-Trowel™ in areas which are not working as well.
DO NOT dilute. Forti-Trowel™ is ready-to-use and is at the optimal concentration. Adding tap water may hinder its performance.
If you use Forti-Trowel™ to trowel the exposed surface of a prefabricated concrete panel, consider spraying the trowelled side and other 5 sides with Forti-Col EG™ for optimal curing, densification and anti-dusting.
IMPORTANT SAFETY TIP: Your trowel will glide more easily over the surface – go slow near the edges and be careful not to overshoot the slab.

TDG UN Status: This material is not regulated as a hazardous material for transportation.

20 L (5.3 gal) (20kg)

Best within 1 year. Store away from direct sunlight. Keep container tightly sealed, in a well-ventilated place, at 36 – 90 °F or 2 – 32 °C.

Australia